Ledger Live iOS setup guide install sync manage

Use the App Store to download the companion app for your hardware wallet before connecting any devices.

Current version requires iOS 15 or later. For older iPhones, manual configuration through desktop synchronization remains the only option. Storage needs: minimum 120MB free space, but 200MB recommended for transaction history.

How to install the mobile companion on iPhone securely?

Verify the publisher name matches exactly with the manufacturer before tapping install. Offload unused apps temporarily if storage warnings appear during installation.

Install only from the Apple App Store and check that the publisher is Ledger SAS before tapping Get. When the app first launches, there is no need to grant location access.

Which authentication methods work after installation?

Face ID or Touch ID can replace typing the app password for daily access, and it stays optional. It unlocks the interface only; moving funds still requires the Ledger device and its own PIN.

For transactions exceeding €1000 equivalent, the system enforces hardware confirmation regardless of mobile settings. This dual-layer approach prevents remote account draining even if mobile credentials get compromised.

Transaction monitoring features

View	Refresh Rate	Data Stored
Portfolio	15 min	30 days
Activity	Real-time	90 days
Prices	5 min	No history

Transaction history can be exported from an account as a CSV file whenever you need it. There is no cloud backup of wallet data to configure, on the phone or anywhere else.

Bluetooth pairing sequence when adding devices

Activate discovery mode by holding both buttons on your hardware wallet for 3 seconds until the LED flashes yellow. The mobile app scans for exactly 47 seconds before timing out.

Interference occurs frequently in areas with active microwave ovens or wireless security systems. If pairing fails consistently, attempt the process in airplane mode with only Bluetooth reactivated.

Why does battery drain increase after setup?

Background synchronization checks occur every 12 minutes by default. Adjust this to hourly in power saving mode via Advanced → Performance settings.

Push notifications for completed transfers consume additional resources. Disable promotional alerts separately from security warnings in notification preferences.

Frequently asked questions

Can I restore from backup without the original device?

No. Restoring a wallet means entering the 24 words on a Ledger device and confirming them there. The phone plays no part in it and should never be shown the phrase.

Why won’t my legacy coins appear?

Over 800 assets require manual enabling in Settings → Experimental features before visibility.

How to verify update authenticity?

Compare cryptographic hashes published on the manufacturer’s security bulletin page with the update details screen.

Is jailbroken device usage permitted?

Modified operating systems automatically trigger certificate revocation until factory reset occurs.

Ledger Live iOS Setup

Download the official mobile application from the App Store on your Apple device. Ensure your smartphone runs at least version 14.0 for compatibility.

Launch the app after installation. Skip unnecessary tutorials by selecting “Skip” or “Later” options to proceed directly to the main interface.

Connect your hardware wallet using a USB-C cable or Bluetooth, depending on your model. Verify the device’s display matches the app’s pairing request for security.

Sync your accounts by tapping “Add Account” and selecting the cryptocurrencies you wish to manage. This step pulls your balance and transaction history into the app.

Ledger Live does not use two-factor codes, authenticator apps or SMS. The Ledger device is the second factor: every transaction is checked and approved on its screen. In Settings you can turn on an optional password lock for the app itself.

Customize notifications to stay updated on transactions and price changes. Adjust these preferences in the settings menu to suit your monitoring needs.

Regularly update the app to access new features and security patches. Enable automatic updates in the App Store settings for convenience.

Downloading Ledger Live app from the App Store

Open the App Store on your Apple device and search for “Ledger Live”.

Ensure the app is published directly by Ledger SAS to avoid counterfeit versions.

Tap the “Get” button next to the app’s listing to initiate the download.

Verify the app’s size, which should be around 100MB, to confirm it’s the correct file.

Once installed, open the app and grant necessary permissions for smooth operation.

Check the app’s version number in the settings to ensure it’s the latest release.

If you encounter any issues during installation, restart your device and try again.

Pairing your Ledger device in the iOS app

Launch the app and tap Get Started. Ledger Live has no user account: there is no e-mail, no username and no password to register. You connect your Ledger device and add crypto accounts, which are derived from the hardware. Keep the phone on a stable connection so the first synchronisation is not interrupted.

There is no e-mail address to provide and no account password to choose. What you can set, in Settings, is an optional password lock for the app on that phone, which can be unlocked with Face ID or Touch ID.

There is nothing to confirm by e-mail. The step that actually matters is pairing your Ledger device over Bluetooth and unlocking it with its PIN, after which your accounts appear in the app.

Connecting Ledger hardware wallet to iPhone via Bluetooth

To pair your cold storage device with an iPhone, ensure the hardware runs firmware version 2.1.0 or later. Open the companion app, select “Add device,” and hold the physical button on your wallet until its LED blinks blue.

Bluetooth Low Energy (BLE) establishes a secure channel without exposing private keys to the smartphone. The connection auto-terminates after 90 seconds of inactivity to prevent unauthorized access attempts. Authentication requires manual confirmation on both devices.

Interference occurs most frequently in areas with multiple active Bluetooth signals – airports or co-working spaces. Reduce pairing failures by disabling nearby electronics and keeping devices within 3 meters during synchronization.

Data transmission encrypts with AES-256, identical to the standard used for blockchain transaction signing. Each session generates ephemeral keys, making intercepted communications useless for replay attacks.

For firmware updates, switch to USB connectivity. Bluetooth lacks sufficient bandwidth for large file transfers exceeding 5MB, which most security patches require.

Battery consumption remains under 3% per hour for continuous connection – comparable to audio streaming. Disabling Bluetooth post-session preserves power without impacting wallet security.

Adding cryptocurrency accounts in Ledger Live iOS app

Tap the ‘+’ button in your portfolio section, select the asset type you want to track, and confirm with your hardware wallet for verification–this automatically generates a receiving address while keeping keys offline.

Supported coins appear in-app only after firmware updates and wallet synchronization; outdated versions may fail to display newer additions like Polkadot or Solana networks despite compatibility.

Managing transaction history on Ledger Live mobile

To filter your transaction history by account, tap the account name at the top of the screen and select the one you want. Only transactions associated with that specific account will appear.

Exporting your transaction records is straightforward. Navigate to the “Export” button in the transaction history section and choose a format (CSV or JSON) for your file. This is useful for tax reporting or personal record-keeping.

If you notice a missing transaction, ensure your app is updated to the latest version. Outdated software can sometimes fail to sync correctly with the blockchain.

For clearer organization, use the search bar to find specific transactions by entering the date, amount, or transaction ID. This feature saves time when dealing with extensive histories.

To view pending transactions, switch to the “Pending” tab within the history section. This ensures you stay informed about unconfirmed transfers and avoids double-spending errors.

Configuring security settings for iOS app

Enable biometric authentication by navigating to the app’s settings menu and selecting the “Biometric Lock” option. This ensures access requires fingerprint or facial recognition, adding an extra layer of protection.

Set up a custom passcode with at least six digits for additional security. Avoid using predictable sequences or personal information like birthdays to minimize vulnerability to brute force attacks.

Turn on the optional password lock in Settings, and use fingerprint or face unlock on mobile. Every transaction still has to be approved physically on the Ledger device.

Regularly review session activity logs to monitor for unusual access attempts. Immediately revoke sessions from unrecognized devices to mitigate potential threats.

Disable automatic sync for sensitive data unless absolutely necessary. Manual syncing reduces the risk of accidental exposure or data leaks.

Ledger Live keeps no login history and sends no security alerts, because there is no account behind it. The notifications it can show are about transactions and app updates, and you can choose which of those you want in Settings.

Q&A:

How do I download Ledger Live on my iPhone?

Open the App Store on your iPhone, search for “Ledger Live,” and tap the download button. Make sure your iOS version is 15.0 or later for compatibility.

Why can’t I see my crypto assets after setting up Ledger Live on iOS?

First, check if your Ledger device is connected via Bluetooth and unlocked. Then, verify that you’ve added the correct crypto accounts in Ledger Live by tapping “Add Account” and selecting the right blockchains. Sync the app if needed.

Is Bluetooth connection safe for managing crypto with Ledger Live on iPhone?

Yes, Ledger uses secure Bluetooth communication. Private keys never leave your Ledger device, so transactions require manual confirmation on the hardware wallet, even when connected wirelessly.

Can I use Ledger Live on iPad if I set it up on iPhone?

Yes. Install Ledger Live on the iPad from the App Store, pair the same Ledger device over Bluetooth and add your accounts again. They are re-derived from the hardware, so nothing has to be copied between the two devices and the recovery phrase is not involved.

How do I update Ledger Live on iOS?

Updates appear automatically in the App Store. Go to the App Store, tap your profile icon, scroll to “Available Updates,” and select Ledger Live if an update is listed. Enable auto-updates in iOS settings for convenience.